Issue
Allow subnet traffic
Hi I have recently made the switch from presence, although the install was plain sailing the config is not. I have a Cisco l3 switch with several Vlans configured on presence I just had to create some firewall rules from each subnet to allow communication to the Vlans that I had on a port channel as a routed port, I have taken the port channel off and just have one routed port to xlearOS and can ping from the switch but none of the devices on any Vlan can. I all Vlan touting is done on the switch and dhcp is done via a pi , any advice on what I am missing would be great I am fairly sure it’s a firewall thing but have no xp in tables.
In Webconfig
Share this post:
Responses (2)
-
Accepted Answer
james gawne wrote:
Hi I have recently made the switch from presence, although the install was plain sailing the config is not. I have a Cisco l3 switch with several Vlans configured on presence I just had to create some firewall rules from each subnet to allow communication to the Vlans that I had on a port channel as a routed port, I have taken the port channel off and just have one routed port to xlearOS and can ping from the switch but none of the devices on any Vlan can. I all Vlan touting is done on the switch and dhcp is done via a pi , any advice on what I am missing would be great I am fairly sure it’s a firewall thing but have no xp in tables.
Make sure your VLAN is established exactly in Clearos.each VLAN will have its own interface configuration and if you are using a single physical interface for many VLANs, make sure it is placed into trunk mode. -
Accepted Answer
I am afraid there is not much support here for this type of issue. If you look through the forums you'll find ClearOS has not been updated in over 18 months and has currently some critical security vulnerabilities. The last maintainer, Nick Howitt, had his contract terminated in 2022. He was also a big helper on the forums but has now been banned so can't post here.
He can still provide updates for a small cost, but it will keep your system secure. He can be contacted at:clearos@howitts.co.uk
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »